Crane forks TKG 5 t, vhs, automatic balancing system from Tigrip

Description

These crane forks are equipped with adjustable tines, height adjustability and an automatic balancing system. Crane forks with automatic balancing tend to point their tines upward when being transported. This prevents the load from unintentionally slipping off the tines.
The shackle is movable and runs on a track depending on the load. The automatic balancing engages by a pressurized gas spring once the forks are loaded. The load will always be in the center of gravity of the forks, ensuring a safe transport.
The automatic balancing system requires a minimum load of 20% of the crane forks‘ working load limit!

All crane forks comply with the latest standards and CE-directives.
Maintenance-free
For the transport of rings or coils, the fork tines are simply pushed together.
Easily adjustable tines for all pallet sizes

For the transport of loads above persons (e.g. on construction sites) appropriate security measures
against falling loads or parts must be taken.
The load must not exceed the fork length.

Technical data

Load capacity: 1000 - 5000 kg
Weight: 413 kg
Adjusting of tines A: 500 - 1000 mm
Usable height B: 1300 - 2000 mm
Length of tines C: 1000 mm
Section of tines D: 150x60 mm
Total height E: 1710 - 2410 mm