- Details
- Spare parts
- Variants 10
Products description Tigrip Crane forks TKG - 1.5 t, vhs, automatic balancing system
Description
These crane forks are equipped with adjustable tines, height adjustability and an automatic balancing system. Crane forks with automatic balancing tend to point their tines upward when being transported. This prevents the load from unintentionally slipping off the tines.
The shackle is movable and runs on a track depending on the load. The automatic balancing engages by a pressurized gas spring once the forks are loaded. The load will always be in the center of gravity of the forks, ensuring a safe transport.
The automatic balancing system requires a minimum load of 20% of the crane forks‘ working load limit!
All crane forks comply with the latest standards and CE-directives.
Maintenance-free
For the transport of rings or coils, the fork tines are simply pushed together.
Easily adjustable tines for all pallet sizes
For the transport of loads above persons (e.g. on construction sites) appropriate security measures
against falling loads or parts must be taken.
The load must not exceed the fork length.
Technical data
Load capacity: 300 - 1500 kg
Weight: 158 kg
Adjusting of tines A: 350 - 900 mm
Usable height B: 1300 - 2000 mm
Length of tines C: 1000 mm
Section of tines D: 100x40 mm
Total height E: 1650 -2350 mm
Spare parts for Crane forks TKG
Just send us a photo of the nameplate and a description of the defective or needed parts.
.We will be happy to provide a quote for the spare parts.