Yale
Hydraulic hoses HH | HH-5 - 0.5 m, 2 x 3/8 Zoll NPT/NW6, 700 bar
Length: 0,5-15 m, Pressure max.: 700 bar, Connection: 2 x 3/8 zoll NPT/NW6, 2 layers of high tensile steel
Round sleeve PU-SG | PU-SG-40 Diameter 40 mm
Diameter: 40 - 150 mm, with fabric insert and PU-coating
3-Grip puller set YHP | YHP-252 G - 20 t
Pulling force : 10 - 50 t, 3-jaw and 2-jaw puller
Low-height cylinder YLS | YLS-10/35- 10 t Yale, with spring return, stroke 35 mm
Capacity: max. 10 - 100 t, Stroke: 35 - 60 mm, operating pressure: 700 bar, with spring return, low height
Foot pump FPS | FPS-2/ 0.5 A - 700 bar
Pressure: max. 700 bar, Reservoir volume: 500 cm³, two-stage, pressure relief valve
Safety-check valves VSM | VSM-11 - 700 bar
Pressure: max. 700 bar, Check valve, Oil-port: 3/6-18 NPT
Universal workshop presses RPES | RPES-1015 M-1 - 10 t
Capacity: 10 - 23 t, Stroke: 150 - 250 mm, electric or manual pump, Valve control: manual
Hydraulic hoses HH-2001 | HH-2001-10 - 1 m, Union nut G 1/4, 2000 bar
Length: 1-5 m, Pressure max.: 2000 bar, Union nut G 1/4, thermoplast hydraulic hoses
Edge protection profile PU-KSE | 065- MAG, with 2 magnets , green, for webbing width 60 mm
For webbing width: 60 - 300 mm, colour coded polyurethane with/without magnets, extremely abrasive and cut resistant.
Cross-bearing puller set YHP | YHP-262 G - 10 t
Pulling force : 10 - 50 t, Bearing extractor and internal extractor, Particularly suitable for the extraction of bearings
Flat cylinder YFS | YFS-10/11 - 10 t Yale, with spring return, stroke 11 mm, 700 bar
Capacity: max. 10 - 100 t, Stroke: 11 - 15 mm, operating pressure: 700 bar, with spring return, low height
Throttle-/Shut-off valves VHM | VHM-1-E Needle, 700 bar, 3/8 NPT
Control: ball or needle, Operating pressure max.: 700 bar, Oil-port: 3/8 NPT inner
Hydraulic hand pump HPS | HPS-1/0.7 A - for single-acting cylinders, 700 bar
for single-acting cylinders, Pressure: max. 700 bar, Reservoir volume: 700 - 10000 cm³, 4-way control valve, precision-adjustable relief valve (handwheel)
Hydraulic hand pump HPS | HPS-2/1.3 A - for single-acting cylinders, 700 bar
for single-acting cylinders, Pressure: max. 700 bar, Reservoir volume: 700 - 10000 cm³, 4-way control valve, precision-adjustable relief valve (handwheel)
Cable puller Yaletrac ST | Y05 0.5 t , with pull rope and lifting strap
Capacity (WLL): 500 - 3200 kg, steel case, portable, universal use
Hand chain hoist VS III | 0.25/1 0.25 t
Capacity: 250 - 50000 kg, low height, powder coated, galvanized chains
PU-coating PU-FB | PU-FB1-030 single-sided, for webbing width 30 mm
For lifting straps/belts, webbing width: 30 - 300 mm, Coating: single and double-sided, transparent polyurethane
Hydraulic cylinder YH | YH-5/30 - 5 t Yale, double-acting, stroke 30 mm, 700 bar
Capacity: max. 5 - 200 t, Stroke: 30 - 500 mm, operating pressure: 700 bar, double-acting with hydraulic return
Multi-purpose puller set YHP | YHP-2752 G - 20 t
Pulling force : 10 - 50 t, 3-grip puller set and crosshead puller set
Machine jacks YAM | YAM-2- with lifting claw, 2 t
Capacity: 2000-15000 kg, Stroke: 113 - 145, Load bearing: on either the head, the claw of jack, manual
Pressure switch VPS | VPS-1 (100 - 800 bar)
Control range: 100 - 800 bar, Difference of switch point: 25 - 70 bar, Oil-port: 3/8 NPT
Hydraulic hand pump HPH | HPH-2/0.7 A - for double-acting cylinders, 700 bar
for double-acting cylinders, Pressure: max. 700 bar, Reservoir volume: 700 - 10000 cm³, 4-way control valve, precision-adjustable relief valve (handwheel)