- Details
- Spare parts
- Variants 4
Products description Yale Solenoid operated valve VEP - VEP-3/3-1 , 3/3-way, Size 1
Details
Solenoid operated valves are used to control the connected hydraulic cylinder by means of a pendant remote control or further electrical controls like pressure switches or limit switches.
All solenoid valves have 3 positions: ? advance ? hold ? return ? In neutral position (stop) the valves switch to “pressureless circuit” so that the oil flow is guided back to the reservoir while the connected cylinder is safely held under pressure.
Normally, solenoid valves are mounted directly onto power packs but can also be connected by using hydraulic piping.
Long-life, direct-control ball seal valves with leak-free “load hold function” in neutral position.
The solenoids guarantee a very quick reaction of the valves so that cylinders can be controlled millimeterwise.
The valves are suitable for continuous operation (100% on/off duration).
The modular principle allows special valve configurations e.g. control of multiple cylinder systems or specific control sequences.
All solenoid valves are equipped with a precisionadjustable pressure set valve which allows the system pressure (force of cylinder) to be limited to any value from 0 to 700 bar.
A glycerine-damped pressure gauge GGY-631 is standard with solenoid valves, 0 - 1000 bar, Ø 63mm.
The valve flanges are designed in a way that valves (with pressure connector) can easily be mounted onto power packs.
Further informations:
Control: 3/3-Wege
Size: 1
Pressure: max. 700 bar
For cylinders: single-acting
Oil flow max.: 12 l/min
Control voltage: 24 V =
Spare parts for Solenoid operated valve VEP
Just send us a photo of the nameplate and a description of the defective or needed parts.
.We will be happy to provide a quote for the spare parts.