Hydraulics

Capacity: 12 - 93 t, Stroke: 40 - 150 mm, max. 700 bar , single-acting with spring return

Capacity: 0.5 - 1.5 t, Spread width: 16-75, 35-220 mm, for all repair, maintenance and assembly work

Operating pressure max.: 700 bar, fits to female and male coupler halves

Pressure: max. 700 bar, Displacement: 0.3-2.1 l/min single-stage, Electric connection: 0.35-2.2 kW - 380-420 V/3Ph, Control valve: 3/3- oder 4/3-way as manual valves

Operating pressure max.: 700 bar, fits to female and male coupler halves

Operating pressure max.: 700 bar, fits to female and male coupler halves

cutting force: : 23 t, max. chain Ø 13 mm

for hydraulic couplers CFY-1 or CMF-1

Pressure max.: 700 bar, E-motor: 1,5-11,0 kW/400 V/50 Hz/3 Ph

with compressed air driven motor, pressure: max. 700 bar, Reservoir: 1.5-5 l, for single-acting or double-acting cylinders

Lifting claws for YS-cylinder

Pressure: max. 700 bar, No load stroke: 4.0 l/min, Under load stroke: 0.23 l/min, Connecting: 0.37 kW - 230 V/1Ph, Control valve: 2/2-way manual-, 4/3-way manual- or 2/2-way solenoid

Piston plates for YS-cylinder

Base adaptor for YS-cylinder, necessary to use extension tubes

Pressure: max. 700 bar, Reservoir volume: 600-1000 cm³, Displacement: 0.06 l/min, 0.7 l/min(two-stage), delivery without battery

HiKOKI batteries, 5.0 Ah, 18 V, fits for PYB Elektric power pack

for Batterys fits for PYB Elektric power pack

Extension tube for YS-cylinder, necessary to use base adaptor

for YH-cylinders, for screwing on , onto the piston and bottom

Length/width: 220 - 450 mm, hight: 30- 80 mm , for fastening hydraulic cylinders in constructions

Load-spreading plate for YS-cylinder, from falling over and sinking into the ground

For hand pumps, hydraulic cylinders and accessories

Thread: depending on model 1/4 NPT - 3/8 NPT - G 3/8 - M14x1.5 - M18x1.5 - R 1/2, operating pressure: max. 700 bar

Thread: depending on model 1/4 NPT - 3/8 NPT - G 3/8 - M14x1.5 - M18x1.5 - R 1/2, operating pressure: max. 700 bar